# The Pec Deck Machine: How to Do Chest Flyes and Which Muscles Work

The pec deck, or machine chest fly: which muscles work, how to set the seat, and how to do it, explained by fitness coach Demid Lobanov.

Demid Lobanov, fitness coach and training methodologist · 2026-10-31
Canonical URL: https://lobanov-fitness.ru/en/blog/trenazher-babochka

The pec deck fly, also called the butterfly, is an exercise in which you sit and bring your arms together in front of your chest along an arc. The pectoralis major does the main work, and the triceps doesn't limit it. The load is there along the whole arc, including the position where the muscle is stretched. The key settings are seat height and placing your shoulder below the levers' pivot axis. It complements presses; it doesn't replace them as the foundation.

I'm Demid Lobanov, a fitness coach. In my exercise library, the pec deck is listed as an accessory exercise after multi-joint presses and as a convenient option for beginners. Below: setup, technique, and research findings.

## Which muscles work on the pec deck

The main muscle is the pectoralis major, primarily its middle fibers. The other muscles share the work as described in my exercise library:

- **the clavicular head of the pectoralis major** helps bring the arms together; its share depends on handle height;
- **the front delt** also brings the arms together in front of the chest; its share is higher when the arms are at shoulder level or above;
- **the coracobrachialis and the short head of the biceps** help bring the arms together (Hall's textbook, chapter 7);
- **the subscapularis, infraspinatus, and teres minor** hold the head of the humerus in the joint;
- **the middle and lower trapezius and the rhomboids** keep the shoulder blade pressed against the back pad.

Unlike in presses, the triceps doesn't limit the set here. So you can safely take your chest close to failure, the point where you can't do one more rep.

## How to set up the machine

Seat height is the main setting. It changes how much different regions of the chest contribute, but it doesn't isolate them: the middle fibers remain the primary movers.

| Handles or pads | What gets more load |
|---|---|
| Below shoulder level (seat higher) | lower fibers |
| At shoulder level | middle |
| Above shoulder level (seat lower) | clavicular head |

Your shoulder joint should sit directly below the levers' pivot axis. Otherwise the moment arm (the distance from the joint to the line of resistance) changes along the arc, and the load becomes uneven. The starting position of the levers sets the stretch: choose a pain-free depth rather than the maximum. Press your shoulder blades against the back pad; otherwise the depth will increase through movement of the shoulder blade.

This is the mechanics from my exercise library: the conclusion is based on fiber direction, and there's no direct measurement here. The only direct measurement I found is a 2025 study by Pinto and colleagues. In beginners who trained only on the pec deck for 12 weeks, the clavicular and sternal heads of the pectoralis major grew almost equally. Seat height wasn't varied in that study, so it's unknown how much it shifts the load.

## How to do the machine fly: step by step

1. Set the seat and levers as described above.
2. Sit down and press your back and shoulder blades against the back pad.
3. Grab the handles or place your forearms on the pads.
4. Smoothly bring your arms together in front of your chest, without jerking out of the stretched position.
5. Keep your back on the pad the whole time; don't help with your torso.
6. Slowly return to the starting position without letting your shoulder drift forward.

![Pec deck horizontal shoulder adduction: shoulder blades steady on the backrest with a fixed slight bend at the elbows](/articles-media/_ex/095.mp4 "720x406")

## Where the pec deck is hardest

There's no single point: the load curve is set by the machine's cam, the part that changes resistance over the course of the movement. This curve differs between models, so my library treats the load as even across the full range of motion. At the start the muscle is stretched; at the end it's shortened. At the very end, bringing your arms together gets harder because a shortened muscle produces less force, and that's normal.

## Can the pec deck build your lower chest?

Don't expect a big shift of load to the lower chest. A higher seat slightly increases the share of the lower fibers, but their own job is to bring the upper arm down toward the ribs. According to my library, the lower chest is loaded more by movements with that component: [dips](https://lobanov-fitness.ru/en/blog/otzhimaniya-na-brusyah), the decline bench press, and the high-to-low cable fly.

## Pec deck or presses

Presses are better left as the foundation. I didn't find a direct comparison of muscle growth on the pec deck versus the press. There is a study on dumbbell flyes, but that's different equipment, so its results carry over to the machine only tentatively.

In a 2020 study by Solstad and colleagues, 17 trained men did the barbell bench press and dumbbell flyes with a 6-rep weight. In the bench press, the pectoralis major, front delt, and triceps were more active over the whole movement and in most phases, by 8–81%.

The authors suggest including both exercises but emphasizing the bench press. Growth wasn't measured in this study, and muscle activity from skin sensors doesn't predict growth. These percentages only show which muscles are engaged.

Growth from the bench press itself has been measured directly. In a 2024 study by Lanza and colleagues, after 10 weeks of bench press only, the pectoralis major grew on MRI. More in the article [How to Build Your Chest](https://lobanov-fitness.ru/en/blog/kak-nakachat-grudnye-myshcy).

The pec deck itself builds muscle too. In the 2025 study by Pinto and colleagues, pectoralis major thickness increased by 17–21% in 15 untrained men who did only the pec deck for 12 weeks. These numbers can't be compared with Lanza's: the people, the duration, and the measurement method differed.

So the order "presses as the foundation, pec deck as an add-on" is my own method; it hasn't been tested in research. The upside of the pec deck is that you can safely work close to failure, and it's easy for a beginner to start.

## Common mistakes

The main mistake is letting the shoulder drift forward in the starting position, so the stretch increases at the expense of the front of the joint capsule. Other mistakes:

- **lifting your back off the pad and finishing with your torso** at the end of the movement;
- **jerking out of the stretched position**, where the shoulder capsule is already under load;
- **shoulder blades not pressed back**, so depth increases through movement of the shoulder blade;
- **maximum starting depth** instead of a pain-free one.

## The pec deck with shoulder pain

My library has no bans that apply regardless of stage, but it does have restrictions:

- **anterior shoulder instability or a past dislocation**: limit the starting depth. According to Hall's textbook (chapter 7), after a dislocation the ligaments are stretched beyond their limit, and the risk of it happening again is higher;
- **acute pain when raising the arm, or pain in the acromioclavicular joint (it connects the collarbone and the shoulder blade), if a diagnosis has already been made**: perform the movement only in a pain-free range;
- **a recent tear of or surgery on the pectoralis major**: only after a doctor clears you;
- **pain without an established cause, severe or worsening**: see a doctor first.

Pain at rest or at night, numbness, shooting pains, and weakness in the arm are reasons to stop training and see a doctor.

## How many sets to do

I found one study on the number of sets on the pec deck. In the 2025 study by Pinto and colleagues, 15 untrained men did only the pec deck for 12 weeks. Within each person, 1 and 3 sets to failure were compared.

Pectoralis major thickness on ultrasound increased equally: by 17–18% in the clavicular head and by 21% in the sternal head. Strength on the pec deck increased by 43–46%. These were beginners; there are no such data for people who have been training for a long time.

Count these sets together with your other chest exercises, following the article [How Many Sets per Week](https://lobanov-fitness.ru/en/blog/skolko-podhodov-v-nedelyu). In your workout, do the pec deck after presses.

## Pec deck and reverse pec deck

These are different exercises. If you sit facing the back pad and move your arms apart, you get the [reverse pec deck](https://lobanov-fitness.ru/en/blog/obratnaya-babochka), which works the rear delts.

## How to add the pec deck to your workout: step by step

1. Check for shoulder pain. If it's pain without an established cause, severe or worsening, see a doctor first.
2. Put presses first and the pec deck after them.
3. Set the seat according to the table above, with your shoulder below the levers' pivot axis.
4. Choose the starting position of the levers based on pain-free depth.
5. Watch for three signs: back on the pad, shoulder blades pressed back, no jerking.

If you need a plan for your goal and your gym, there's the [personalized program](https://lobanov-fitness.ru/en/program).

I post exercise breakdowns on my YouTube channel [@lobanov_fitness](https://www.youtube.com/@lobanov_fitness).

## Sources

1. Hall SJ. Basic Biomechanics. 9th edition. McGraw Hill, 2022. Chapter 7: the upper extremity.
2. Solstad TE et al. A Comparison of Muscle Activation between Barbell Bench Press and Dumbbell Flyes in Resistance-Trained Males. J Sports Sci Med, 2020. [Full text](https://pmc.ncbi.nlm.nih.gov/articles/PMC7675616/)
3. Pinto MD et al. Pectoralis Clavicular and Sternocostal Thicknesses Increase Similarly in Response to One and Three Sets of Pec Deck Resistance Training in Untrained Young Men. J Strength Cond Res, 2025. [Article](https://doi.org/10.1519/JSC.0000000000005045)
4. Lanza MB et al. Muscle hypertrophy response across four muscles involved in the bench press exercise: Randomized 10 weeks training intervention. J Bodyw Mov Ther, 2024. [Article](https://doi.org/10.1016/j.jbmt.2024.07.054)
