# How Many Reps to Do for Muscle Growth and Strength

How many reps per set you need for muscle growth and for strength: what meta-analyses show, where the limit for light weights lies, and how to choose your rep range.

Demid Lobanov, fitness coach and training methodologist · 2026-09-28 · updated 2026-09-29
Canonical URL: https://lobanov-fitness.ru/en/blog/skolko-povtoreniy-delat

A wide range of reps works for muscle growth: heavy sets of up to 8 reps, moderate sets, and light sets of more than 15, as long as the set ends close to failure. Failure is the point at which you can no longer complete the next rep with proper technique.

Maximal strength requires heavy weights. Research hasn't found a single best rep count for muscle growth, so the range is chosen based on the exercise and comfort. Below is what the research shows, where the limit for light weights lies, and how to choose your range.

## Why there's no single best rep count

Muscle growth depends very little on the weight, as long as sets end close to failure. A 2021 meta-analysis by Lopez and colleagues pooled the results of 28 studies with 747 participants. Heavy sets of up to 8 reps, moderate sets of 9–15, and light sets of more than 15 produced the same muscle growth when sets were taken to failure. Strength, however, increased more with moderate and heavy weights.

In a 2021 review, Schoenfeld and colleagues re-examined the familiar scheme of "heavy weights for strength, moderate for size, light for endurance." Their conclusion was that muscles grow across a wide range of loads. How close to failure to train is covered in the article [Training to Failure: Do You Need It for Muscle Growth?](https://lobanov-fitness.ru/en/blog/trenirovka-do-otkaza)

## What the research shows

Several meta-analyses reached the same conclusion: with comparable training volume, meaning the amount of work done, and sets taken to failure, muscle growth depends very little on the weight across a wide range of loads. Strength, meanwhile, increases more with heavy weights.

In the table, "max" is the weight a person can lift once, and volume load is the weight multiplied by the number of reps and sets.

| Study | What was compared | Muscle growth | Strength |
|---|---|---|---|
| Lopez et al., 2021, 28 studies | up to 8, 9–15, and more than 15 reps to failure | the same | greater with moderate and heavy weights |
| Schoenfeld et al., 2017, 21 studies | loads up to 60% and above 60% of max, all sets to failure | the same | max weight increases more with heavy-weight training |
| Carvalho et al., 2022, meta-analysis | from very light to heavy weights with equal volume load | the same | greater with heavy weights |
| American College of Sports Medicine (ACSM), 2026, overview of 137 systematic reviews | loads from 30 to 100% of max | no consistent effect of load found | greater when training with 80% of max or more |

## Where the limit for light weights lies

For weights below 30% of max, the data disagree. The Carvalho meta-analysis found no difference in growth even for such weights. But in a 2018 study by Lasevicius and colleagues, 30 men trained one arm and one leg for 12 weeks with 20% of max, and the other arm and leg with 40, 60, or 80% at equal volume load. At 20%, the cross-sectional area of the thigh muscle, that is, the area of a slice across its fibers, increased by 8.9%; at the other loads, by about 20%. So in practice, the lower limit is about 30% of max.

With a weight of about 30% of max, muscles grow as much as with heavy weights if sets are taken to failure. In a 2022 study by Lasevicius and colleagues, 25 untrained men did leg extensions for 8 weeks:

| Load | To failure | Not to failure |
|---|---|---|
| 80% of max | muscle growth +8.1%, about 12 reps | +7.7%, about 7 reps |
| 30% of max | +7.8%, about 34 reps | +2.8%, about 20 reps, no statistically significant growth |

No statistically significant growth means there isn't enough data to confidently distinguish growth from random fluctuations. Light sets stopped well short of failure, at roughly 20 reps out of 34, didn't produce statistically significant growth. With heavy weights, failure added nothing in this study: the lighter the weight, the more important it is to get close to failure.

## How many reps you need for strength

Maximal strength requires heavy weights. According to the 2026 ACSM recommendations, strength increases more when training with 80% of max or more, which is usually up to 8 reps per set. In isolation exercises, where movement occurs at a single joint, the same percentage allows more reps: in the leg extensions in Lasevicius 2022, about 12. In that study, max weight in the exercise increased by 33.8% with training at 80% of max and by 17.7% at 30%.

Heavy sets build muscle too, but you need more of them for the same growth. In a 2014 study by Schoenfeld and colleagues, 17 trained men did either 3 sets of 10 reps or 7 sets of 3 reps with equal volume load for 8 weeks. Biceps thickness increased equally, while max weight in the bench press increased more in the heavy-set group.

## Time under tension and hormones

Rep count is often linked to time under tension, meaning how long the muscles work during a set, and to hormone release after training. In a 2015 meta-analysis by Schoenfeld and colleagues, muscle growth was the same with rep durations from 0.5 to 8 seconds. Very slow reps, longer than 10 seconds, build muscle less effectively according to the authors, but there are few such studies.

A rise in hormone levels after training didn't speed up muscle growth either. In a 2010 study by West and colleagues, 12 young men trained their arms under two conditions. In one, they did heavy leg exercises after arm curls, and growth hormone and testosterone levels rose; in the other, they didn't. Arm muscles grew almost equally: by 12% without the hormone rise and by 10% with it.

## Which range to choose

Since muscle growth depends little on rep count, the range is chosen for practical reasons: how well you tolerate the exercise, how long a set takes, and how accurately you can sense your reps in reserve. Reps in reserve are the number of reps you can still do with proper technique.

In the table, working sets are the main sets of an exercise after the warm-up; compound exercises are those in which movement occurs at several joints.

| Situation | Practical guideline | Why |
|---|---|---|
| Most working sets | 6–12 reps | almost the same growth as from heavy sets, in less time; reps in reserve are easier to estimate |
| Main compound barbell exercises: squats, presses, pulls | with 2–4 reps in reserve | less fatigue and muscle damage |
| Simple isolation exercises | you can go closer to failure | lower injury risk |
| Goal is maximal strength | some sets with 80% of max or more | heavy weight is needed for strength |

The first two rows and the guideline "isolation exercises go closer to failure" are recommendations from Helms and colleagues, experts in strength training programming, published in 2016. In their article, they advise working mostly in the 6–12 rep range.

In long sets of more than 12 reps, people are worse at sensing how many reps they have left before failure, and such a set often ends further from failure than it seems.

## How I apply this with clients

For muscle growth, I look at three things: mechanical tension, which is the force muscles produce under load; proximity to failure; and the volume of quality work. Rep range isn't on this list.

I don't treat time under tension as a goal: it's a consequence of tempo, rep count, and reps in reserve. In my work, I adjust reps in reserve.

I add weight when the target number of reps has been completed with proper technique in all working sets for several workouts in a row. The increment is the smallest available, down to small 0.25–1 kg plates.

## How to apply it: step by step

Choose the number of reps based on the exercise, your goal, and how you feel during the set. It's convenient to do most sets in the moderate range, finish light sets close to failure, and add heavy sets if strength matters. The steps below work both for beginners and for people who have been training for a long time.

1. Choose a range for the exercise using the table above: for most sets, 6–12 reps.
2. Pick a weight so that the set ends close to failure, with 1–3 reps in reserve, and in main barbell exercises mostly with 2–4 reps in reserve.
3. In light sets of more than 15 reps, get closer to failure: with a light weight, this matters more.
4. If your goal is strength, add sets with 80% of max or more in compound exercises.
5. Add weight when you complete the target number of reps with proper technique in all working sets for several workouts in a row. Use the smallest increment your equipment allows.
6. How many working sets a muscle needs per week in total is covered in the article [How Many Sets per Week You Need for Muscle Growth](https://lobanov-fitness.ru/en/blog/skolko-podhodov-v-nedelyu).

The guidelines in this article are for healthy adults. If you have injuries or health limitations, weight and rep count are chosen individually.

If you need a plan for your goal and your circumstances, there's the [personalized program](https://lobanov-fitness.ru/en/program).


For when to add weight or switch phases, see [Progressive Overload](https://lobanov-fitness.ru/en/blog/progressiya-nagruzok) and [Periodization in Strength Training](https://lobanov-fitness.ru/en/blog/periodizaciya-silovyh-trenirovok). You can also have your full routine checked through a [training audit](https://lobanov-fitness.ru/en/protocol).
## Sources

1. Lopez P et al. Resistance Training Load Effects on Muscle Hypertrophy and Strength Gain: Systematic Review and Network Meta-analysis. Med Sci Sports Exerc, 2021. [Article](https://doi.org/10.1249/MSS.0000000000002585) · [Full text](https://pmc.ncbi.nlm.nih.gov/articles/PMC8126497/)
2. Schoenfeld BJ et al. Strength and Hypertrophy Adaptations Between Low- vs. High-Load Resistance Training: A Systematic Review and Meta-analysis. J Strength Cond Res, 2017. [Article](https://doi.org/10.1519/JSC.0000000000002200)
3. Carvalho L et al. Muscle hypertrophy and strength gains after resistance training with different volume-matched loads: a systematic review and meta-analysis. Appl Physiol Nutr Metab, 2022. [Article](https://doi.org/10.1139/apnm-2021-0515)
4. Currier BS et al. American College of Sports Medicine Position Stand. Resistance Training Prescription for Muscle Function, Hypertrophy, and Physical Performance in Healthy Adults: An Overview of Reviews. Med Sci Sports Exerc, 2026. [Article](https://doi.org/10.1249/MSS.0000000000003897) · [Full text](https://pmc.ncbi.nlm.nih.gov/articles/PMC12965823/)
5. Schoenfeld BJ et al. Loading Recommendations for Muscle Strength, Hypertrophy, and Local Endurance: A Re-Examination of the Repetition Continuum. Sports (Basel), 2021. [Article](https://doi.org/10.3390/sports9020032) · [Full text](https://pmc.ncbi.nlm.nih.gov/articles/PMC7927075/)
6. Lasevicius T et al. Effects of different intensities of resistance training with equated volume load on muscle strength and hypertrophy. Eur J Sport Sci, 2018. [Article](https://doi.org/10.1080/17461391.2018.1450898)
7. Lasevicius T et al. Muscle Failure Promotes Greater Muscle Hypertrophy in Low-Load but Not in High-Load Resistance Training. J Strength Cond Res, 2022. [Article](https://doi.org/10.1519/JSC.0000000000003454)
8. Schoenfeld BJ et al. Effects of different volume-equated resistance training loading strategies on muscular adaptations in well-trained men. J Strength Cond Res, 2014. [Article](https://doi.org/10.1519/JSC.0000000000000480)
9. Schoenfeld BJ et al. Effect of repetition duration during resistance training on muscle hypertrophy: a systematic review and meta-analysis. Sports Med, 2015. [Article](https://doi.org/10.1007/s40279-015-0304-0)
10. West DW et al. Elevations in ostensibly anabolic hormones with resistance exercise enhance neither training-induced muscle hypertrophy nor strength of the elbow flexors. J Appl Physiol, 2010. [Article](https://doi.org/10.1152/japplphysiol.01147.2009) · [Full text](https://pmc.ncbi.nlm.nih.gov/articles/PMC2885075/)
11. Helms ER et al. Application of the Repetitions in Reserve-Based Rating of Perceived Exertion Scale for Resistance Training. Strength Cond J, 2016. [Article](https://doi.org/10.1519/SSC.0000000000000218) · [Full text](https://pmc.ncbi.nlm.nih.gov/articles/PMC4961270/)
12. Halperin I et al. Accuracy in Predicting Repetitions to Task Failure in Resistance Exercise: A Scoping Review and Exploratory Meta-analysis. Sports Med, 2022. [Article](https://doi.org/10.1007/s40279-021-01559-x)
