# Reverse Pec Deck: How to Do It, Which Muscles Work, and How to Set Up the Machine

The reverse pec deck, or rear delt machine fly: how to set the height and grip, which muscles work, and how to do it, explained by fitness coach Demid Lobanov.

Demid Lobanov, fitness coach and training methodologist · 2026-10-30
Canonical URL: https://lobanov-fitness.ru/en/blog/obratnaya-babochka

The reverse pec deck, also called the rear delt machine fly, is a rear delt exercise: you sit with your chest against the pad and open your arms from in front of your chest out to the line of your shoulders. The middle traps and rhomboids work along with the rear delt. The key setting is handles at shoulder height: if they're lower or higher, the load shifts to other muscles. The pad takes the work off your torso and lower back, so the exercise suits beginners too.

I'm Demid Lobanov, a fitness coach. I've included the reverse pec deck in [the programs I've written](https://lobanov-fitness.ru/en/program). There's little direct research on this exercise, so what follows is mostly mechanics from my exercise library, plus what I was able to verify.

## Which muscles work in the reverse pec deck

The main muscle is the rear head of the deltoid, known as the rear delt. According to Hall's biomechanics textbook (Chapter 7), together with the side head, the infraspinatus, and the teres minor, it abducts the shoulder in the horizontal plane. The other muscles take part in the movement as described in my exercise library:

- **the middle traps and rhomboids** pull the shoulder blades together. In a two-arm machine with a chest pad, their share is higher than in a single-arm cable version;
- **the infraspinatus and teres minor** help abduct the shoulder and keep the head of the humerus in its socket;
- **the teres major and lats** assist, and their share rises sharply if the handles are below shoulder height;
- **the lower traps** keep the shoulder blade from riding up at the end of the movement;
- **the spinal erectors and core muscles** work minimally: the chest pad takes almost all the load off them. That's the whole point of the machine.

The rear head is the one that pressing programs barely touch. That's why it gets loaded separately.

## How to set up the machine

Handle height is the main setting. Adjust the seat so the handles are at shoulder height:

| Handles | Where the load goes |
|---|---|
| At shoulder height | rear delt |
| Below shoulder height | lats and teres major |
| Above shoulder height | traps |

The second setting is the starting position of the levers. The farther forward they are at the start, the greater the range of motion. If your shoulder hurts at the beginning of the movement, start closer to neutral; more on this below.

Machines themselves vary. How the load changes through the movement depends on the specific machine: the cam, the lever length, and the starting position of the handles.

## How to do the reverse pec deck: step by step

1. Sit facing the backrest and press your chest against it. Adjust the seat so the handles are at shoulder height.
2. Grab the handles. Bend your elbows slightly and lock that angle for the whole set.
3. Start the movement from the shoulder: open your arms, but don't squeeze your shoulder blades together yet.
4. Bring your arms to the line of your shoulders or slightly past it. Beyond that point, the shoulder blade does the moving.
5. Return smoothly to the start without lifting your chest off the pad.

![Reverse pec deck machine: chest pressed to the pad, horizontal shoulder abduction to the shoulder line without early scapular retraction](/articles-media/_ex/104.mp4 "720x406")

The reverse pec deck is the same machine as the regular pec deck for the chest; you just sit facing it and open your arms out.

## Grip: palms down or neutral

Here the direct data differ from my working setup, and the difference is small. In a 2013 study by Schoenfeld and colleagues, 19 trained men did the reverse pec deck to failure with two grips. Rear delt activity was significantly higher with a neutral grip than with a pronated, palms-down grip: a difference of about 4% of maximal contraction, with a confidence interval from 0.1 to 7.4%. The infraspinatus also worked more with the neutral grip.

In my programs, the working setup is palms down: according to the mechanical model, this should give the rear head a larger moment. But this is a model, measurement did not confirm it, and both options work. The study measured activity; muscle growth was not assessed. If the handles allow it and a palms-down grip is uncomfortable for your shoulders, use a neutral grip.

## Where the reverse pec deck is hardest

It's usually hardest near the middle of the range of motion, where your arm is perpendicular to the machine's lever and the moment arm is greatest. This is a calculation, not a measurement: on your machine, the peak may fall at a different point.

Another limitation matters more. In a two-arm machine, your arm doesn't reach the midline of the body: the other handle and the pad get in the way. That's exactly where the rear delt is longest. So in this machine the muscle works at medium length, and its longest position goes unloaded.

## What to pair with the reverse pec deck

That's why my exercise library pairs the machine with other variations. Each one covers its own range of muscle length:

| Exercise | Rear delt length range | Key point |
|---|---|---|
| Two-arm machine | medium length | handles at shoulder height |
| Single-arm reverse pec deck | long length: the arm crosses the midline | handle at shoulder height, torso still |
| Single-arm cable reverse fly | long length | torso turned so the cable is perpendicular to the arm at the start |
| Bent-over dumbbell reverse flyes | short and medium length | torso angle held for the whole set |

There's a caveat here: it hasn't been proven that the stretched range is better for growth. In my database's register of settled questions, it's one of the important factors, and not the only one. A 2025 study by Larsen and colleagues on the side delt (24 trained people, 8 weeks) found no difference in growth between dumbbells and cables, even though their loading profiles differ. The range of motion was the same, and the authors themselves write that the stretched position may not have been emphasized enough. I haven't found a comparison like this for the rear delt.

For lateral raises, see the article [Dumbbell lateral raises](https://lobanov-fitness.ru/en/blog/mahi-gantelyami-v-storony). The rear delt also works in rows with the elbows out to the sides; more on that in the article [Horizontal rows](https://lobanov-fitness.ru/en/blog/gorizontalnaya-tyaga).

## Common reverse pec deck mistakes

The main mistake is squeezing your shoulder blades together from the very start and doing the movement with your back. The rear delt then barely lengthens. Other mistakes:

- **lifting your chest off the pad** and helping with your torso;
- **handles not at shoulder height**: the work shifts to the lats and teres major or to the traps;
- **the elbow angle changes during the set**: it should stay slightly bent and locked;
- **going past the shoulder line at any cost**: at the end of the range, the movement shifts to the shoulder blade.

![Left: the seat is too high, the handles are below the shoulders and the arms go down. Right: the handles are at shoulder height](/articles-media/obratnaya-babochka/oshibka-vysota-en-v1.jpg "1200x800")

## With shoulder pain

During an impingement flare-up or with pain in the acromioclavicular joint, start the range of motion closer to neutral, meaning limit the starting position. With impingement, pain occurs when you raise your arm: the shoulder tendons get compressed under a bony process of the shoulder blade called the acromion.

This restriction is temporary and adjustable. Pain with no established cause, or pain that is severe or getting worse, is a reason to see a doctor first.

## How many sets to do

I haven't found dedicated studies on reps, sets, and frequency for the reverse pec deck, so here are the guidelines from my database for the delts in general: 10–20 reps per set, 1–3 reps in reserve, 2 times a week. Reps in reserve means how many more reps you could still do with proper technique.

Choose the number of rear delt sets using the article [How many sets per week](https://lobanov-fitness.ru/en/blog/skolko-podhodov-v-nedelyu): the head is counted separately, and rows, where it only assists, count as half a set for it.

The reverse pec deck fits well at the end of a workout: it doesn't require you to stabilize your torso, and it causes little fatigue. If your rear delts are noticeably lagging, put it first.

## How to add the reverse pec deck to your workout: step by step

1. Check whether your shoulder hurts at the beginning of the movement. During an impingement flare-up or with acromioclavicular joint pain, limit the starting position. If the pain has no established cause, or is severe or getting worse, see a doctor first.
2. Set the seat: handles at shoulder height.
3. Put the exercise at the end of your workout: 10–20 reps with 1–3 in reserve.
4. Watch two signs: your chest stays on the pad, and your shoulder blades don't come together before your shoulder moves.
5. Add a variation that loads a different part of the length range: the cable reverse fly, the single-arm reverse pec deck, or bent-over reverse flyes.

If you need a plan for your goal and your gym, there's the [personalized program](https://lobanov-fitness.ru/en/program).

I post exercise breakdowns on my YouTube channel [@lobanov_fitness](https://www.youtube.com/@lobanov_fitness).


For other rear-delt and upper-back lifts, see [Face Pull](https://lobanov-fitness.ru/en/blog/tyaga-k-licu), [Bent-Over Dumbbell Lateral Raises](https://lobanov-fitness.ru/en/blog/mahi-gantelyami-v-naklone), and [How to Build Your Back](https://lobanov-fitness.ru/en/blog/kak-nakachat-spinu). You can get a video technique check in a [training audit](https://lobanov-fitness.ru/en/protocol).
## Sources

1. Hall SJ. Basic Biomechanics. 9th edition. McGraw Hill, 2022. Chapter 7: the upper extremity.
2. Schoenfeld B et al. Effect of hand position on EMG activity of the posterior shoulder musculature during a horizontal abduction exercise. J Strength Cond Res, 2013. [Article](https://doi.org/10.1519/JSC.0b013e318281e1e9)
3. Larsen S et al. Dumbbell versus cable lateral raises for lateral deltoid hypertrophy: an experimental study. Front Physiol, 2025. [Article](https://doi.org/10.3389/fphys.2025.1611468) · [Full text](https://pmc.ncbi.nlm.nih.gov/articles/PMC12277279/)
