# How to Build Your Shoulders: Exercises for Every Delt Head and How Many Sets to Do

How to build your shoulders: which exercises load the front, side, and rear delt heads and how many sets to do—fitness coach Demid Lobanov breaks it down.

Demid Lobanov, fitness coach and training methodologist · 2026-11-01
Canonical URL: https://lobanov-fitness.ru/en/blog/kak-nakachat-plechi

To build your shoulders, you need to load all three heads of the deltoid: presses alone aren't enough. The front head works well in presses, the side head in lateral raises, and the rear head in reverse flyes and rows. The side head grows less from the bench press than any other measured muscle. I didn't find such measurements for the overhead press, but mechanically the front head does the main work there too. That's why a shoulder workout needs separate exercises for the side and rear heads.

I'm Demid Lobanov, a fitness coach. In [the programs I've written](https://lobanov-fitness.ru/en/program), the most frequent shoulder exercises are dumbbell lateral raises (12 times) and the machine overhead press (5 times). I've also included the reverse fly in programs. Below: how the deltoid is built and how to put together a workout.

## What the deltoid is made of

The deltoid has three heads with different jobs. They start on different bones and converge on the humerus:

| Head | Origin | What it does | Where it's stretched |
|---|---|---|---|
| Front | collarbone | raises the arm forward, brings the arms together in front of you, and rotates the upper arm inward | arm behind the plane of the body |
| Side | acromion | moves the arm out to the side | arm down and slightly adducted |
| Rear | spine of the shoulder blade | moves the upper arm back and rotates it outward | arm in front of the body |

The origins and functions of the heads are described in Hall's biomechanics textbook (Chapter 7) and in my database; the stretched positions, in my database. That's why it makes sense to analyze and load the heads separately.

## Which exercises load each head

The table lists exercises from my exercise library. It's an analysis of movement mechanics; for most of these exercises, there are no direct growth measurements.

| Head | Main exercises | What matters |
|---|---|---|
| Front | [machine overhead press](https://lobanov-fitness.ru/en/blog/zhim-nad-golovoj-v-trenazhere), 55° incline dumbbell press | already works in bench presses |
| Side | [dumbbell lateral raises](https://lobanov-fitness.ru/en/blog/mahi-gantelyami-v-storony), side-lying lateral raise | the vertical press doesn't replace them |
| Rear | [reverse fly](https://lobanov-fitness.ru/en/blog/obratnaya-babochka), rope face pull, bent-over lateral raises | presses barely touch it |

A common mistake: treating the overhead press as a side delt exercise and not adding abduction work. According to my library, in the vertical press the front head takes the main load, while the side head makes a significant but not maximal contribution.

## What growth measurements show

There are few direct studies on the growth of individual heads. Two are the most useful for planning. In a 2024 study by Lanza and colleagues, 13 men did only the bench press for 10 weeks, and growth was measured with MRI. The front delt grew more than in the control group. For the side delt, no such difference from the control group was shown, and its gain was smaller than that of all the other measured muscles. So the bench press loads the shoulder unevenly.

In a 2025 study by Larsen and colleagues, 24 trained men and women did lateral raises for 8 weeks: twice a week, 5 sets to failure, one arm with a dumbbell and the other with a cable. Side delt thickness increased by 3.3–4.6%, and no difference was found between the dumbbell and the cable. There was no non-training group, the participants ate in a calorie surplus and gained about 2 kg, and most of them had done lateral raises before. The growth shows that the side head responds to lateral raises, and the choice of equipment here is secondary.

I didn't find comparable growth measurements for the rear head. A separate study on grip in the reverse fly measured only muscle activity; more on that in the article about this exercise.

## How to position your arm in lateral raises

The position of the upper arm changes how the muscles work. In a 2020 study by Coratella and colleagues in 10 male bodybuilders, the side delt was more active with the upper arm in a neutral position than when it was rotated outward. Rotating it inward, "pouring water," added work for the rear delt, upper traps, and triceps. Growth wasn't measured in this study. More in the article on lateral raises.

![Standing dumbbell shoulder abduction: targets the lateral deltoid in the scapular plane with a controlled lowering phase](/articles-media/_ex/100.mp4 "720x406")

## How wide shoulders relate to the side head

Training doesn't change the width of your bones. The side head sits on the outside, so as it grows, the shoulders look wider. This follows from where the muscle is located; I didn't find a direct measurement of this link. Don't expect quick changes: in the Larsen study, the gain over 8 weeks was a few percent.

## How many sets for shoulders

My guideline for muscles is 10–20 working sets per week, and each head has its own volume. How to count them is covered in the article [How Many Sets per Week](https://lobanov-fitness.ru/en/blog/skolko-podhodov-v-nedelyu). A set counts in full for the muscle doing the main work and as half for the one assisting. That's why the front head already gets part of its volume from bench presses.

My database guidelines for the delts: 10–20 reps per set, 1–3 reps in reserve, and 2 times a week. Reps in reserve are the number of reps you could still do with good technique. I didn't find any studies comparing different doses for the delts. In the Larsen study, the side head grew with 10 sets per week of 12–16 reps to failure, which matches the guideline in terms of sets and reps.

## Sample shoulder workout

This scheme is based on my database and hasn't been tested in research. Adapt it to your program.

1. Machine overhead press or 55° incline dumbbell press, for the front head and part of the side head. If your program already has a lot of bench pressing, you can cut this exercise back.
2. Dumbbell lateral raises: side head.
3. Reverse fly or rope face pull: rear head.

The rear head is underloaded more often than the others. If it's lagging, my database puts it at the start of the workout.

## How to build your shoulders at home

At home, dumbbells or resistance bands are enough: lateral raises, bent-over lateral raises for the rear delt, and the dumbbell press, seated or on a bench inclined to about 55°. There's only one limitation, the weight increments: once your reps go above the upper limit, you need heavier dumbbells. If you don't have them, slow down the lowering phase: the set gets harder with the same weight. More about training without a gym in the article [Home Workouts](https://lobanov-fitness.ru/en/blog/trenirovki-doma).

## Shoulders and pain

Pain when raising the arm is often related to impingement, a compression of the shoulder tendons under a bony process of the shoulder blade, the acromion. Repetitive overhead movements can provoke it (Hall textbook, Chapter 7).

- **Acute phase of impingement, if you've already been diagnosed**: remove overhead movements, press at an angle, and move within a pain-free range;
- **Recent shoulder dislocation or surgery**: shoulder exercises only after your doctor clears you;
- **Anterior shoulder instability or a past dislocation**: limit the top position in the overhead press and the depth in the dumbbell press;
- **Pain at rest or at night, numbness, shooting pains, weakness in the arm**: stop training and see a doctor;
- **Pain with no established cause, severe or getting worse**: see a doctor first.

## How to build your shoulders: step by step

1. Check the conditions. Pain with no established cause, severe or getting worse: see a doctor first. Recent shoulder dislocation or surgery: get your doctor's clearance first.
2. Include an exercise for each head in your program: a press, lateral raises, and a reverse fly or face pull.
3. Count sets for each head separately; count bench presses as half a set for the front head.
4. Work in the 10–20 rep range with 1–3 reps in reserve, 2 times a week.
5. Add weight or reps as long as your technique holds.
6. Put a lagging rear head at the start of the workout.

If you need a plan for your goal and your gym, there's the [personalized program](https://lobanov-fitness.ru/en/program).

I post exercise breakdowns on my YouTube channel [@lobanov_fitness](https://www.youtube.com/@lobanov_fitness).

## Sources

1. Hall SJ. Basic Biomechanics. 9th edition. McGraw Hill, 2022. Chapter 7: the upper extremity.
2. Lanza MB et al. Muscle hypertrophy response across four muscles involved in the bench press exercise: Randomized 10 weeks training intervention. J Bodyw Mov Ther, 2024. [Article](https://doi.org/10.1016/j.jbmt.2024.07.054)
3. Larsen S et al. Dumbbell versus cable lateral raises for lateral deltoid hypertrophy: an experimental study. Front Physiol, 2025. [Article](https://doi.org/10.3389/fphys.2025.1611468) · [Full text](https://pmc.ncbi.nlm.nih.gov/articles/PMC12277279/)
4. Coratella G et al. An Electromyographic Analysis of Lateral Raise Variations and Frontal Raise in Competitive Bodybuilders. Int J Environ Res Public Health, 2020. [Article](https://doi.org/10.3390/ijerph17176015) · [Full text](https://pmc.ncbi.nlm.nih.gov/articles/PMC7503819/)
